MIST ELIMINATOR FILTER
99% EFFICIENT ON AIRBORNE WATER DROPLETS 3 MICRONS AND LARGER
Application:
The HM Series Moisture Separator is an impingement type panel filter that serves two important functions: its primary purpose is to collect large water droplets and oil mist from the airstream and divert the liquid to an appropriate drain; its secondary function is as a heavy duty washable particulate filter. The HM Series is built for use in outside air ducts, side access housings and built-up filter banks. Other applications include chilled water coils and mist-type humidifiers. The HM Series is designed for higher airflow velocities. It performs best in a system running at no more than 10% above or below its rated velocity of 500 fpm. It has been independently tested to by over 99% efficient on water droplets measuring 3 microns and larger.
Construction:
The HM Series uses a 24-gauge metal frame to enclose the media pack consisting of multiple layers of corrugated and flat screen wire positioned for efficient drainage. The pack is then placed between two layers of expanded metal, and is made to fit firmly inside the frame giving the HM Series filter exceptional strength and durability. The bottom of the filter as 3/8” diameter drain holes and the top is identified with proper positioning for drainage and airflow. The frame is made with mitered corners and is secured with pop-rivet(s).
Filter Cleaning and Coating:
- To clean a dirty filter, rinse it with a moderate-to-heavy stream of warm water. High-powered steam cleaning or chemical dips are unnecessary and not recommended.
- The HM Series filter is not supplied from the factory with filter adhesive coating. If desired, it may be sprayed before installation with Filter Coat, a water soluble adhesive and detergent.
Due to continuing research and development, we reserve the right to make modifications to any product.
AVAILABLE IN THREE ALLOYS
HMA
Aluminum
HMG
Galvanized Steel
HMS
Stainless Steel
PRODUCT HIGHLIGHTS
- 99% Efficient on 3 Micron Water Droplets
- Heavy Duty Construction
- Washable and Reusable
- Drain Holes Along Bottom of Frame
FAST FACTS
Minimum Order:
No Minimum Order
Sizing Options:
Standard and Special Sizes Available
> download tech sheet for details
Classification:
UL Classified 900
Max Temp:
HMA – 275 Degrees F
HMG – 325 Degrees F
HMS – 900 Degrees F
HMA STANDARD SIZES
Nominal Dimensions / Part Number / Carton Qty. / Carton Wt.
12 x 24 x 1 / HMA101224 / 12 / 20.0
16 x 20 x 1 / HMA101620 / 12 / 24.0
16 x 25 x 1 / HMA101625 / 12 / 37.0
20 x 20 x 1 / HMA102020 / 12 / 38.0
20 x 25 x 1 / HMA102025 / 12 / 42.0
24 x 24 x 1 / HMA102424 / 12 / 48.0
12 x 24 x 2 / HMA201224 / 12 / 32.0
16 x 20 x 2 / HMA201620 / 6 / 27.0
16 x 25 x 2 / HMA201625 / 6 / 40.0
20 x 20 x 2 / HMA202020 / 6 / 41.0
20 x 25 x 2 / HMA202025 / 6 / 45.0
24 x 24 x 2 / HMA202424 / 6 / 51.0
HMG STANDARD SIZES
Nominal Dimensions / Part Number / Carton Qty. / Carton Wt.
12 x 24 x 1 / HMG101224 / 12 / 27.0
16 x 20 x 1 / HMG101620 / 12 / 29.0
16 x 25 x 1 / HMG101625 / 12 / 42.0
20 x 20 x 1 / HMG102020 / 12 / 44.0
20 x 25 x 1 / HMG102025 / 12 / 48.0
24 x 24 x 1 / HMG102424 / 12 / 55.0
12 x 24 x 2 / HMG201224 / 12 / 38.0
16 x 20 x 2 / HMG201620 / 6 / 33.0
16 x 25 x 2 / HMG201625 / 6 / 46.0
20 x 20 x 2 / HMG202020 / 6 / 47.0
20 x 25 x 2 / HMG202025 / 6 / 51.0
24 x 24 x 2 / HMG202424 / 6 / 58.0
HMS STANDARD SIZES
Nominal Dimensions / Part Number / Carton Qty. / Carton Wt.
12 x 24 x 1 / HMS101224 / 12 / 37.0
16 x 20 x 1 / HMS101620 / 12 / 39.0
16 x 25 x 1 / HMS101625 / 12 / 46.0
20 x 20 x 1 / HMS102020 / 12 / 46.0
20 x 25 x 1 / HMS102025 / 12 / 55.0
24 x 24 x 1 / HMS102424 / 12 / 61.0
12 x 24 x 2 / HMS201224 / 12 / 44.0
16 x 20 x 2 / HMS201620 / 6 / 39.0
16 x 25 x 2 / HMS201625 / 6 / 52.0
20 x 20 x 2 / HMS202020 / 6 / 53.0
20 x 25 x 2 / HMS202025 / 6 / 57.0
24 x 24 x 2 / HMS202424 / 6 / 64.0
DOWNLOAD TECH SHEET